Our Solutions
Our Industries
Careers
Insights
Latest Posts
-
ArticleSeptember 24, 2026
The Hidden Cost of Closing a Safety Alert Without Fixing the Cause
Detection spots the risk. The right action protects the plant. Picture a metal fabrication plant during a busy shift. Heat and exertion fog an operator’s safety glasses. To get a clearer view, the operator removes them while grinding a metal part. A supervisor sees it and stops the work. The i -
ArticleSeptember 18, 2026
No Major Breakdown. So Why Did Your Production Line Miss Its Target?
Six four-minute stops add up to 24 minutes of stopped time in a shift. Repeat that pattern over two daily shifts and 250 operating days, and the total reaches 200 hours a year. This is an illustrative calculation, not a measured plant result. Production downtime analysis connects these interrupti -
ArticleSeptember 10, 2026
Production Line Monitoring in 2026: Why OEE Dashboards Miss Microstops, Changeovers, and Lost Throughput
Consider an illustrative shift. The line reports a respectable OEE result, yet output falls below plan. A feeder hesitated repeatedly, the changeover ran longer than expected, and a downstream queue kept filling and clearing. None of those events lasted long enough or carried enough context to becom -
ArticleSeptember 3, 2026
Edge Computing Manufacturing in 2026: Why the Pilot Dies on OT Data, Latency, and the DMZ
The demo works. A camera or vibration sensor detects a fault on one production line. Nine months later, the same model is still running on a box someone carried into the plant, connected to a historian export and relying on a firewall exception the plant security team wants closed. The model did
Article
In-Plant Logistics Visibility: Tracking Materials, Vehicles, and Inventory Without Manual Reporting
October 1, 2026
Article
The Hidden Cost of Closing a Safety Alert Without Fixing the Cause
September 24, 2026
Article
No Major Breakdown. So Why Did Your Production Line Miss Its Target?
September 18, 2026
Article
Production Line Monitoring in 2026: Why OEE Dashboards Miss Microstops, Changeovers, and Lost Throughput
September 10, 2026
Article
Edge Computing Manufacturing in 2026: Why the Pilot Dies on OT Data, Latency, and the DMZ
September 3, 2026
Article
Prescriptive Maintenance in 2026: Closing the Loop from Prediction to Executed Work Order
August 26, 2026
